Touch Driver, Control Panel and Calibration Tool.
NOTE: This driver has been qualified for CE 6.0 and 7.0.
Use Legacy Driver MT 7.11 SR1 for CE 4.0 and 5.0.
Posted: April 2013
File Size: 2.9MB MT 7 Software Users Guide (PDF 1MB)
Mac OSX (INTEL) driver for PCT (PX controller), SCT (EX and CX controllers), DST (DX controller), Resistive (SX controllers: SC400, SC500, SC800). Only five (5) simultaneous touch events supported.
PX,DX, EX, CX
Supports Windows 2000 (32), XP(32/64), Vista (32/64), and 7 (32/64)
MT7 SDU is a feature-rich software diagnostics utility designed for customers developing and optimizing applications on 3M touch systems. The MT7 SDU offers easy system evaluation, data logging, direct controller interfacing, accuracy and draw testing, and many other diagnostic and troubleshooting features.
Supports Windows 2000, XP, Vista.and 7
Posted: September 2011
File Size: 890 KB
Multi-touch PX, DX, EX, CX
Supports Windows 7 (32/64), Vista (32/64), XP( 32/64), and 2000 (32)
Use the MT 7 Gestures API to enhance the user interface on your application with intuitive gesture functionality when using 3M SCT, DST, and PCT product families in combination with the MT 7 Driver.
Supports Windows 7, Vista, XP and 2000
NOTE: Requires the MT 7 Driver to be installed in the system.
Posted: July 2010
File Size: 1449 KB
Multi-touch PX, DX, EX, CX
Supports Linux (2.6 Kernel)
Use the MT 7 Gestures API to enhance the user interface on your application with intuitive gesture functionality when using 3M SCT, DST, and PCT product families in combination with the MT 7 Driver.
Supports Linux (Kernal 2.6)
NOTE: Requires the MT 7 Driver to be installed in the system.
Posted: July 2010
File Size: 1025KB
Use the HID Calibration Tool to calibrate 3M SCT (3250EX, 3855EX, 7650EX), DST and PX touch systems in place of 3M MicroTouch MT7 software drivers.
Supports Windows XP, Vista, and Windows 7.
NOTE: Calibration tool only, no control panel. Should not be loaded on systems with MT 7 drivers.
Posted February 2012
File Size: ZIP 822 KB
EX II (Serial Only), SMT3e, MT series, SMT3R Supports DOS
Use this utility to modify controller settings and to calibrate the sensor at different resolutions under DOS. This utility only supports serial controllers.
File Size: 125 KB
Supports Mac OS 8.5, 8.5.1, 8.6, and 9.0 on iMac, G3 and G4 systems with USB firmware 1.1 or 1.2. The following options are accessed through the control panel: calibration, configuration options and multiple monitors support for up to 4 USB touch screens. The installation is manual. You can also view or download the TouchWare 5.3 Mac User's Guide in PDF format.
To install your touchscreen driver/utility directly from your browser, select OPEN (WinZip files will appear). Unzip or extract files to an easy-to-find directory, then select "setup.exe" from the file list to start the installation process.
To save a touchscreen driver/utility for future use or for use on other systems,
(1) Select SAVE to download your driver/utility to your hard drive or flash drive. Be sure to save the driver/utility file to an easy-to-find directory on your drive.
(2) To install driver/utility from your system drive, locate the driver file and unzip file to easy-to-find location.
(3) Select "setup.exe" from the file list to start the installation process.
If you don't have WinZip on your system, contact Technical Support to receive a self-extracting version.
Apple and Linux users:
SAVE the download file to your system. Be sure to save the file to an easy-to-find location on your system.
3M TouchNet Access
The 3M TouchNet site provides a host of 3M Touch Systems reference materials created by our touch specialists for use by customers, prospects and industry experts. By registering for this site you will have access to all existing and future postings. 3M Touch Systems reserves the right to deny access to this site during without cause.
