Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Form-In Place Gaskets


3M™ Form-In Place Gaskets

3M™ Form-in-Place Gasket FIPG is an epoxy-based resin system, ideal for sealing hard disk drive covers. This epoxy-based, elastomer material is designed for use on hard disk drive covers, serving as both a reusable gasket and contamination barrier.

  • Useful in critical environments due to silicone-free, epoxy base
  • Excellent reliability due to high purity material set and low outgassing
  • Low ionic contamination
  • Programmable gasket pattern eliminates die-cutting and waste
  • Reduced costs because there's no additional assembly
  • Inexpensive to change gasket pattern
  • Resilient cover can be reused after drive rework without applying new gasket
  • Products
  • Product Documentation
  • Application Tips
Product Description/Application Ideas
3M™ Form-in-Place Gasket 1688 Two-part epoxy, elastomer mateiral. Designed for use on hard disk drive covers, serving as a reusable gasket and contamination barrier.
3M™ Form-in-Place Gasket 4302 3M™ Form-in-Place Gasket 4302 is an elastomeric material designed for use on hard disk drive covers, serving as a reusable gasket and contamination barrier. One part epoxy system dispensed into a bead on the cover and thermally cured.
3M™ Form-in-Place Gasket 7103 HC Two-part epoxy elastomer product designed for use in hard disk drive covers, serving as a reusable gasket and contamination barrier. Hardness ~60 Shore A.