Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Home

Solutions
Products and Services
Resources
Customer Service

Utilities can minimize animal-caused outages with 3M™ Animal Protection Products, including the 3M™ Electrostatic Animal Guard. 3M™ Breakout Boots are designed to be used in conjunction with 3M terminations, to seal the breakout area and rejacket the phases on multi-conductor cable. 3M™ Grounding Kits easily and reliably ground a variety of terminations and cable types. 3M™ Scotchlok™ Lugs and Connectors are crimp connectors for power cable conductors. This reliable product line includes copper and copper/aluminum connectors, stem and oil seal connectors, repair connectors and a parallel clamp for aerial stem connectors. 3M also offers mounting brackets for molded rubber terminations and kits for rejacketing.

Terminating Accessory Products

3M™ 3/C Cable Breakout Boots and 3/C Phase Rejacketing System
3M™ Cold Shrink Silicone Rubber 3/C Cable Breakout Boots 8560 Series and 3M™ Silicone Rubber RJS Series 3/C phase Rejacketing Systems are designed to be used in conjunction with 3M™ Terminations, to seal the breakout area and rejacket the phases on three conductor cable without grounds.
Breakout Boots
3M™ Breakout Boots are designed to reliably seal the breakout area and rejacket the phases on multi-conductor cable.
   Heavy Duty Breakout Boot
   Cable Breakout Boots and Phase Rejacketing System
3M™ Cable Cleaning and Preparation Products
3M™ Preparation and Cleaning Products make the toughest cleaning job easier. These products include Scotch-Brite™ Hand Pads, 3M™ Cable Cleaning System and Scotch® Electrician's Abrasive Roll A-3.
3M™ Electrostatic Animal Guard
This is a patented electrostatic barrier which attaches to energized electrical insulators/bushings rated up to 35kV.
3M™ Lugs and Connectors
3M™ Scotchlok™ Lugs and Connectors are crimp connectors for power cable conductors. These connectors are used when splicing and terminating power cable.
3M™ Sealing and Grounding
Cold shrink cable accessory sealing kits are designed to seal the end of a JCN cable. Use these kits when installing elbows or other cable accessories that do not include a jacket seal.
3M™ Mounting Brackets
3M™ Mounting Brackets MB and MBS Series are designed to mount 3M molded rubber terminations.